DOUBLE CONE BLENDER

The double cone blender is an efficient and versatile machine to mix dry powder and granules homogeneously & widely used for pharmaceutical, food, chemical and cosmetic products etc. It consists of a cylindrical shell with two conical frustums provided with opening for charging and discharging. Butterfly valve is provided for discharge. The vessel is mounted on a sturdy stand with bearing blocks & driven through a gear box coupled with motor. The machine is provided with control panel board and safety railing. All joints are argon arc welded, ground and polished to mirror finish from inside and matt finish from outside.

SALIENT FEATURES

• The conical shape at both ends enables uniform mixing and easy discharge.
• All contact parts are made out of SS304/SS316 quality material, as required by customer.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching. The same will be provided with SS cover & limit switch. ( In 200 Kgs. & above model )
• Two nos. of safety rods will be provided at back side. ( One LH side & one RH side )
• Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
• One shaft with 04 nos. of fixed buffels with mirror polishe provided inside the cone.
• Cone will be mirror polished from the inside and outside & structure will be matt polished.
• All moving parts covered with SS304 covers.
• Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. Tarter, digital timer & Amp. Meter.
• As per customer requirement machine will be provided with left side drive or with right side drive.
• Worm reduction gear used for speed reduction.
• Food grade rubber gasket will be used on both ends of cone as well as in butterfly valve.
• General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.
• All safety guards & covers made out of SS304 in GMP Model.
• Hand wheel will be provided for manual tilting of cone.
• Safety guards provided with limit switch to not start the machine when Safety guards are not in proper position.