Cleanroom Dispensing and Sampling booths

Cleanroom-Classified Garment Cubicle Pass-through’s Air Shower Laminar Air flow units Dispensing/Sampling booths Bio Safety Cabinets Dedusting Booth Fume Hoods

Dispensing/Sampling booths

Cleanroom Dispensing and Sampling booths Booths are designed to give mixed air flow stream for product, operator and environmental protection and used to control the hazardous emissions of dust powder during powder dispensing / sampling process. 0.3 micron downward air stream deflects air-borne dust away from the operator breathing zone which is caused in handling operation. Dust particle available is being filtered at three levels of filtration prior to being circulated back to the booths air stream. For filling, refilling, weighing & sampling of Raw material & Components

Dispensing and Sampling booths Specifications

Description	Specifications
Type	Front Open
Direction of flow	Vertical
Material of Construction	SS304 / SS316 or CRCA Powder Coated
Cleanliness	Class 100 as per US FED STD 209E
Particle Retention	0.3 micron & Above
Noise Level	65dB on On Scale 'A' ± 5
Velocity	90 FPM ± 20%
Illumination	Flourescent tubes diffusers
Pressure Differential	0-25 mm inclined Manometers / Magnehelic Guage
Power Supply	230V Single Phase, 50 Hz
Pre-Filters	10 - 15 micron rating, 3-Layers of HDPE mesh, 6mm Pressure Drop
Intermediate Filters	3 micron & above, two layers of HDPE woven mesh and one layer of Non-woven polyester Bondex Media, 9 mm Pressure Drop, Efficiency 97%
Supply HEPA Filters	99.97% efficiency @ 0.3 micron ratiing
Exhaust HEPA Filters	99.97% efficiency @ 0.3 micron ratiing
Blower Assembly	Statically & Dynamically balanced DIDW type blower system

Special Features

Designed in accordance with WHO-GMP
3-Stage Filteration like Prefilter , Fine Filter , HEPA filter
Heavy duty Low noise motor blower assembly
Suitable to accomodate to floor & table balances